Is the analysis of the converter’s hot water parameters in line with those under normal operating conditions?
Thread Content
Analysis results of VCM-treated hot water: pH: 9.07; Conductivity: 4250.0 us/cm; TDS: 2130.0 mg/l; Turbidity: 0.19 NTU; Total phosphorus: 0.23 mg/l; Total iron: not detected; Chloride ions: 11.65 mg/l; Calcium ions: not detected; Magnesium ions: not detected; COD: 517.6 mg/l; Total hardness: not detected
Personally, I think there are issues with the data analysis: neither calcium nor magnesium was detected, yet the conductivity is high, which is abnormal； A high TDS value indicates a high level of dissolved substances in the water. What are these dissolved substances? ； The COD level is also so high; if it were deionized water, the COD wouldn’t be this high, so the analysis results are abnormal