Tell me how much of these chemical additives you use
Thread Content
Demulsifier, Heavy metal removal agent, Antifouling and anti-coking agent, Organic amine, Corrosion inhibitor
This needs to be adjusted according to the actual conditions of your device
Refer to the design values and actual performance.
For our demulsifiers, the key factor is the properties of the crude oil; if the quality of the oil is poor, more of it needs to be added； Around 50 ppm, and about 45 ppm for the neutralizing corrosion inhibitor
Each case must be analyzed individually; it depends on what your raw materials are to determine the amount of additive to use.