How to avoid problems with poor water flow

2021-10-24View Original

Thread Content

Since the residue in our unit is relatively heavy at present and the coke level in the coke tower is high, we soak the coke for 1 hour before draining water initially. However, to prevent broken coke from falling back and blocking the water drainage line during this coke-soaking process, we avoid stopping the water pump； Adjustment procedure: When the reading on the neutron level gauge at the top rises to 10, reduce the water injection rate into the coke tower from the maximum value of 350–400 t/h to 200 t/h. Continue injecting water for 1.5 hours (an additional 300 tons of water), and then stop the pump to allow the water to drain out. Can this be effectively avoided?

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.

How to avoid problems with poor water flow

Thread Content

Related Threads in This Forum

← Previous

Next →

Submit a Project

Disclaimer

Quick Links