Inspection for violations at construction sites (Issue 7, September 26, 2018)
Thread Content
Inspection for Violations at the Construction Site (Issue No. 7, September 26, 2018): 1. There are many violations at construction or production sites, which hinder stable and safe production. We ask everyone to point out the issues shown in the images so as to help them improve their work. Thank you for your participation and support! ! ! Airtightness inspection site – Reference answers: 1. No safety belt was used during work at heights; 2. The upper rungs of the scaffold were not fully covered; 3. People on the left side stood directly on the scaffold poles; 4. The protective mask was lifted up; 5. There were too many miscellaneous items at the site
Workers working at heights were not wearing safety belts, and there were no warning signs at the site
Workers should wear safety belts. Stand on a stable temporary platform or ladder.
1. The scaffolding columns are not secured; diagonal bracing and horizontal supports should be installed； 2. When laying the scaffold planks, they should be laid completely and securely, with the distance from the vertical wall on the side facing the wall not exceeding 150 mm. 3. Scaffolding planks should be secured with steel wires ； 4. Incomplete use of protective equipment by construction workers – Protective masks and similar items should be worn ； 5. When working at heights, a safety belt must be worn and a supervisor should be assigned ； 6. Safety evacuation routes should be provided for work at heights ； 7. Some on-site personnel were not wearing protective clothing ； 8. Isolation barriers and warning signs should be installed at the construction site ； 9. Welding at heights without measures to prevent spark splashing ； 10. Unrelated personnel should not remain at the site, and clutter there should be cleared promptly.
The on-site staff were not wearing their work uniforms properly； The construction workers are not using their safety belts properly.
1. The protective eye mask is not worn properly； 2. The vertical poles are not arranged properly, with no upper or lower access paths ； 3. The scaffolding used for operations is not standard; it’s too small and consists of just one piece, which makes it unsafe for workers to work on it ； 4. It is unsafe for unauthorized persons to stand on the pole ； 5. There are too many people at the site, and the supervisors are not able to concentrate ； 6. Insulation materials at the site were left scattered without being cleaned up in a timely manner ； 7. There were also personnel on site who were not wearing work uniforms ； 8. No fire extinguishing equipment was seen at the site ；
1. Failure to wear a safety belt when working at heights. 2. Failure to wear anti-static work clothing. 3. Scaffold planks not fully laid out. 3. Protective screens not worn during construction
1. Workers working at heights are not wearing safety belts； 2. The platform or ladder is not up to standard, resulting in unsafe working conditions for the workers ； 3. No warning signs at the site ；
1. The construction workers did not wear the required protective gear and did not use safety belts. 2. The scaffolding planks were tied together, and the working platforms did not meet the required standards. 3. Protective face shields were not used properly. 4. There were no warning signs. 5. There were no fire extinguishers at the work site. 6. The equipment at the bottom of the scaffold is unprotected
The scaffolding was not erected properly; there were no means for ascending or descending it, and planks were used for climbing. There is a possibility that pipelines were stepped on, and uniform clothing was not provided