Look at the picture to check for violations (2018.10.22, October 5th issue)
Thread Content
Look at the picture to check for violations (2018.10.22 October 5th issue) Instructions: 1. There are many violations at the engineering site or production site, which are not conducive to stable and safe production. I hope everyone will point out the problems in the picture and help them improve their work. Thank you for your participation and support! ! ! On-site assembly welding pictures: Reference answer: 1. There is no boundary line between working areas. 2. The components to be welded are placed upright without fixation. 3. The workers are within the dumping range of the components. 4. There is no fire protection equipment. 5. There is no guardian.
1. There are no warning signs at the scene； 2. There is no full-time safety management personnel on site ； 3. There are no measures to protect against sun and rain when working in the open air.
1. There are no warning signs at the construction site； No isolation zone set up ； 2. Hot work without supervision ； 3. No fire extinguishing equipment is provided at the fire work site ； 4. Protection of on-site cables without pipes ； 5. The steel pipe is standing upright without any anti-tipping measures. ； 6. The scene is messy and some safety passages are blocked.
1. There is no fire extinguisher 2. No work warning signs are seen 3. The monitoring personnel do not play a role
1. There is no fire extinguisher 2. There is no work warning sign 3. There is no full-time safety management personnel on site； 4. Pipe fittings are arranged in a chaotic manner
1. It is completely possible to move out of the production area for welding； 2. There is no warning isolation or warning signs at the welding site. ； 3. There are no protective measures or warning signs for ground cables. ； 4. There are no safety tips on the entire site. ； 5. There are no fire-fighting facilities in the entire area ； 6. There are no fixing measures for the workpiece, and no one is monitoring the worksite.
1. There are no fixed measures for the erected and placed welding workpieces.； 2. There are other people operating next to the erected welding workpiece. ； 3. The distance between the welding machine and the welding site does not meet the specifications.
1. Mixed use of carbon steel and stainless steel equipment can easily cause stainless steel corrosion； 2. The equipment is placed upright without falling prevention, which is a safety hazard. ； 3. The equipment is severely corroded and has no anti-rust treatment, so long-term use may cause safety hazards.
1. Guardians are not in place； 2. The fire extinguisher is not in place ； 3. Construction can be completed in the prefabricated area as much as possible, and the on-site operating equipment should be relatively close to each other. ； 4. There are safety hazards when two construction welding workers are welding facing another employee.
1. The flange falls to the ground without its cover. 2. The pipe is placed vertically and can easily injure people.