HCBBS Forum (English)
Submit Chemical Projects / Find Solutions
Amplify Your Requirements on a Broader Chemical Platform *Engineering · Technology · Equipment · Solutions*
Submit Request

【Series Discussions on Haichuan Hazardous Waste Warehouses】Requirements for Setting Up Hazardous Waste Warehouses

2019-01-11View Original

Thread Content

This post was last edited by Wise Ming on 2022-3-26 at 16:04. Regarding the setup of hazardous waste storage areas, similar discussions have taken place on the forum before; now a standard solution has been found and is shared here with everyone. I would like to ask how a warehouse for storing resin waste should be set up? https://bbs.hcbbs.com/thread-2059098-1-1.html (Source: Haichuan Chemical Industry Forum Website)
Reply #22019-01-11
The setup of hazardous waste storage facilities must meet the following requirements: 1. Hazardous waste storage areas should adhere to the principles of preventing dispersion, loss, and leakage. 2. At the entrance of the hazardous waste storage facility, the words “Hazardous Waste Storage Facility” should be clearly displayed in a prominent location (in yellow on a black background, in a rectangular shape of 30cm x 15cm), and hazard warning signs should also be installed. 3. The responsibility system for environmental pollution prevention and control should be posted on the wall. 4. The production process flow chart should be posted on the wall, with the steps that generate hazardous waste indicated on it. 5. Prepare a catalog of hazardous waste. 6. A cofferdam, diversion channels should be installed at the entrance of the hazardous waste storage area, and the ground should be made impermeable. 7. Hazardous waste must be stored in a classified and zoned manner, with clear separation markers between different types of waste, such as fences or boundary lines marked on the ground. Post signs on the walls of each type of storage area, and post signs on each type of item. 8. A scale should be placed in the hazardous waste storage area, with a label for the scale posted on the wall. Place a fire extinguisher. 9. Keep an inventory ledger for the storage of hazardous waste.
Reply #32019-01-11
There are unified international regulations regarding hazardous waste storage facilities and the installation of warning signs or labels for such waste; for details, refer to: \"Graphic Symbols for Environmental Protection\" (GB 15562.2) and \"Pollution Control Standards for Hazardous Waste Storage\" (GB 18597).
Reply #42019-05-19
The setup of hazardous waste storage facilities must meet the following requirements: 1. Hazardous waste storage areas should adhere to the principles of preventing dispersion, loss, and leakage. 2. At the entrance of the hazardous waste storage facility, the words “Hazardous Waste Storage Facility” should be clearly displayed in a prominent location (in yellow on a black background, in a rectangular shape of 30cm x 15cm), and hazard warning signs should also be installed. 3. The responsibility system for environmental pollution prevention and control should be posted on the wall. 4. The production process flow chart should be posted on the wall, with the steps that generate hazardous waste indicated on it. 5. Prepare a catalog of hazardous waste. 6. A cofferdam, diversion channels should be installed at the entrance of the hazardous waste storage area, and the ground should be made impermeable. 7. Hazardous waste must be stored in a classified and zoned manner, with clear separation markers between different types of waste, such as fences or boundary lines marked on the ground. Post signs on the walls of each type of storage area, and post signs on each type of item. 8. A scale should be placed in the hazardous waste storage area, with a label for the scale posted on the wall. Place a fire extinguisher. 9. Keep an inventory ledger for the storage of hazardous waste.
Reply #52019-05-20
I’m not sure; maybe we shouldn’t require an axial flow fan and a drainage ditch
Reply #62019-05-21
It is not mandatory to install an axial flow fan; however, guide channels must be set up to collect and treat the fluid, with discharge outside being prohibited.
Reply #72021-03-29
Can windows really be installed in hazardous waste storage areas? I don’t see any explicit requirements in the GB18597-2013 Standards for Pollution Control of Hazardous Waste Storage. There is now a change to remove the windows, and the graphics review team has requested documentation to support this
Reply #82021-03-29
If the standard does not require it, it can be turned on or off. In fact, the hazardous waste storage area is equipped with forced ventilation, so it’s fine even if the windows are not opened.
Reply #92022-03-26
For more discussions and case studies on hazardous waste warehouses, please see this series of posts: [HaiChuan Hazardous Waste Warehouse Series Discussions】https://bbs.hcbbs.com/thread-3316727-1-1.html (Source: HuahaiChuanliu – HaiChuan Chemical Forum Website)

Submit a Project

**Looking for Chemical Technology, Equipment & Solutions?** No Registration Required Broader Platform Exposure | Global Chemical Service Provider Connections

Submit Request — Free Consultation

Disclaimer

This is an automated machine translation of the original thread. Some technical terms may have inaccuracies; the original text shall prevail. Click "View Original" at the top right to access the source page, which supports IP-based automatic real-time language translation. Please watch out for contact details and sales inducements to prevent fraud. All content and translations are for reference only, representing solely the poster's personal views. For enquiries, email service@hcbbs.com.