【Daily Discussion】Utilities - Civil Engineering - 20200813
Thread Content
When members are controlled according to the minimum reinforcement ratio, what principles should be followed for the substitution of reinforcing bars? Feel free to participate actively in the discussions – the system offers generous rewards for answering questions from VIP members! ! !
When the reinforcement in a component is controlled by strength requirements, replacement is carried out based on the principle that the strength remains unchanged before and after the replacement. When the component is reinforced according to the minimum reinforcement ratio, or when replacing steel bars of the same grade, replacement is done based on the principle that the area remains equal before and after the replacement
When members are reinforced according to the minimum reinforcement ratio, the replacement of steel bars shall be carried out based on the principle that the areas before and after replacement remain equal.