[Daily Discussion] Utility Engineering – Water Supply and Drainage – 20200826
Thread Content
How should the connection between building exhaust pipes and outdoor pipes be handled? Feel free to participate actively in the discussions – the system offers generous rewards for answering questions from VIP members! ! !
An inspection well should be provided at the connection between the discharge pipe and the outdoor drainage pipeline.
At the junction where the discharge pipe connects to the outdoor sewer, a inspection manhole should be provided
The discharge pipes of the building are connected to the outdoor area at the same level as the pipe tops, with a water flow angle of not less than 90°. If a drop connection is used for the discharge pipes and the drop height is greater than 0.3 m, there is no restriction on the water flow angle.
An inspection well should be provided at the connection between the discharge pipe and the outdoor drainage pipeline.
An inspection well should be provided at the connection between the discharge pipe and the outdoor drainage pipeline. The discharge pipes of the building are connected to the outdoor area at the same level as the pipe tops, with a water flow angle of not less than 90°. If a drop connection is used for the discharge pipes and the drop height is greater than 0.3 m, there is no restriction on the water flow angle.
The discharge pipes of the building are connected to the outdoor area at the same level as the pipe tops, with a water flow angle of not less than 90°. If a drop connection is used for the discharge pipes and the drop height is greater than 0.3 m, there is no restriction on the water flow angle.