BOG compression plant
Thread Content
The BOG compressor building is semi-open; the open height at the bottom is 7 meters, and the height of the upper maintenance structure is also 7 meters. In accordance with the requirements of the process conditions, ventilated windows (with adjustable axial flow fans) are installed on the roof, along with corresponding emergency exhaust fans; the air exchange rate is 12 times per hour (calculated based on the volume of a space with a height of 6 meters), and explosion-proof axial flow fans are used ； Flammable gas alarm sensors are installed on the roof of the building. Under normal conditions, natural ventilation is used; when a concentration alarm is triggered, the windows that facilitate natural ventilation are closed, and an explosion-proof axial flow fan is activated to remove the natural gas accumulated in the room
The original poster is really professional; here, the BOG is located outdoors, which saves a lot of hassle.
May I ask how high the semi-open profiled steel sheets should be installed on the upper part of the second-floor platform of the compressed factory building? After a while, I can’t remember where I saw this height requirement! ! !