Compressor liner cooling water sight glass
Thread Content
The compressor cylinder liners of the unit are cooled using closed-loop deionized water, but the sight glass becomes dirty within less than a month, making it impossible to see the rotation of the impeller. Why is this? Are there any other methods besides demolition and cleanup? ?
Common reasons for the fouling of the coolant sight glass in compressor cylinder liners include the deposition of minerals, salts, or other impurities in the water, which may be due to the fact that the deionized water used still contains certain impurities or that not all minerals have been completely removed. To address this issue, the following methods can be tried: 1. Check and optimize the quality of the demineralized water to ensure it reaches a higher level of purity. 2. Install filtering equipment on the sight glass or use more efficient filter elements to remove the tiny particles that cause the sight glass to become blurry. 3. If conditions permit, considering installing an automatic cleaning system in front of the sight glass, such as a water spray or scraper mechanism, to regularly or continuously remove deposits. Through these measures, it may be possible to reduce the contamination of the viewports, thereby decreasing the frequency and intensity of cleaning them. .