Reciprocating compressor outlet pressure
Thread Content
I just want to ask: isn’t the outlet pressure of the two-stage reciprocating compressors in my factory fixed? Why does it sometimes decrease when the inlet pressure is low, and why does it increase when the pressure is high?
The outlet pressure varies with operating conditions； If all operating conditions are normal, when the inlet pressure decreases or increases, the outlet pressure will also change in the same direction!
It’s normal; if you don’t want this to happen and aren’t concerned about energy waste, you can add a secondary line to allow some of the compressed air exiting to return to the inlet buffer tank, thereby maintaining pressure balance
Sure, if the inlet pressure is high, then the outlet pressure will also be high. The quality of construction of the compressor is definitely good.
It depends on factors such as pressure ratio, operating conditions, temperature of the medium, and its composition!
It depends on factors such as pressure ratio, operating conditions, temperature of the medium, and its composition! It’s normal; in standard processes, a bypass line is used to send some of the compressed gas exiting the system back to the inlet buffer tank in order to maintain pressure balance. If a large amount of gas needs to flow through this bypass line, our excess gas volume regulation equipment can be utilized to achieve greater energy savings. Contact number: 13870209881
The outlet pressure of the compressor is determined by the system.