Problems with the cyclic hydrogen compressor
Thread Content
Can the cyclic hydrogen compressor be started under pressure? It’s about opening the inlet and outlet valves
There is no problem opening the inlet valve; it should be a large-cycle operation, with the outlet valve being opened gradually to allow flow out
Of course, just ensure a proper dry gas seal is in place. Study hard*, keep it up.
The motor load is too high, which may cause the protection to trigger a shutdown directly
No, the driving load is too high; the unit’s self-protection interlock activates
Steam turbine-driven ones work fine, while those driven by motors need to be started under reduced pressure; otherwise, the starting load is too high, triggering current overload protection and preventing startup