Can the outlet pressure of a liquid ring vacuum pump reach 2.5 MPa?
Thread Content
Currently, due to issues with process selection, the company needs to purchase a liquid ring compressor with a discharge volume of around 9,000 cubic feet per hour. The inlet pressure is at atmospheric level, while the outlet pressure is required to be 2.5 MPa. The working medium is an organic liquid. I would like to ask whether a liquid ring vacuum pump can achieve such a high outlet pressure Could there be any issues with the selection? Please offer some guidance from those who are more experienced
The outlet pressure was entered incorrectly; it should be 0.25 MPa
Our water ring vacuum pumps experience overcurrent as soon as the output reaches 0.1
Liquid ring vacuum pump? It should be negative pressure, right?
The torch gas recovery water ring compressor undergoes two stages of compression; the current operating outlet pressure is 0.35 MPa.
That can’t be right; for a liquid ring vacuum pump, it should be the pressure at the inlet that matters, right?
0.25MPa is no problem
The Kenfuilai single-unit models with a capacity of 4.5 kilograms are available; there are also models with a smaller capacity of 2.5 kilograms and lower pressure