Is nitrogen required during the no-load test run of a reciprocating compressor?
Thread Content
Question: I am conducting a no-load test on the reciprocating compressor, but the nitrogen system is not yet ready； Since the machine is oil-lubricated, is it necessary to activate nitrogen protection for the middle section in order to conduct a trial run?
The key is that your compressor is the type used to produce the medium. If it is an oil-free oxygen compressor, experiments must be conducted using dry and clean gas. Otherwise, using any gas whose cleanliness level is insufficient will cause contamination.
Is the no-load test carried out at the manufacturing plant or at the production site? If it is at the production site, as a manager, one should follow the standard operating procedures to help employees develop good operating habits ；
In terms of the structure of a reciprocating compressor, there is a nitrogen protection system for the piston packing, and this system must be in use； As for using nitrogen protection for individuals in the sports industry, it is recommended to adopt such a practice; first of all, it helps to develop good operating habits ； Second: Check the sealing effect