Carburetor inlet line adjustment
Thread Content
During the operation of the finned vaporizer, liquid nitrogen leaks from the inlet flange. After loosening, the pipeline and the equipment flange are 3cm misaligned. Adjust the pipeline support (cut it off). After adjusting the height of the flange sealing surface, fix the support.
I accidentally included a photo of my daughter in the first post.
:P, check three times and make sure. Obviously the concentricity is not good.
It is difficult to find such problems through three checks and four determinations. It is basically impossible to detect them with the naked eye. Stronger supervision during piping can greatly avoid such problems.