Basis for selecting the pump flushing scheme
Thread Content
Many chemical process pumps come with flushing options, but why choose seal flushing? What is the basis for choosing different flushing protocols? Is there anyone with experience who can give some advice? Thank you!
Your statement that \"many chemical pumps come with flushing solutions\" is too general. I don’t know what the pump that needs to be flushed looks like; it would be better to send a picture for a look. Are you referring to the water seal for water purification? It is mostly used in slurry pumps. Just guessing.
How can it be lubricated if it’s not rinsed and sealed? The flushing scheme depends on the circumstances, such as medium temperature and properties
The purpose of sealed flushing is to provide a better environment for the mechanical seal. This can be divided into many specific effects. Rinse to dissipate heat. The heat generated by the liquid seal must be controlled. This can be achieved by flushing the sealing chamber with liquid to carry away heat and control temperature rise. Lower the liquid temperature. In some cases, the liquid temperature is too high, affecting the sealing performance. In such cases, the temperature must be reduced to improve the properties of the liquid. Change the pressure in the sealing chamber. In some cases, it is necessary to increase or decrease the pressure in the sealing chamber to improve performance. This can be achieved by suppressing evaporation or reducing the thermal load on the seals. Cleaning process liquid. If the process fluid contains inappropriate solid particles or contaminants, it is necessary to clean the fluid inside the sealing chamber. In extreme cases, it may also be necessary to supply a clean liquid from outside the sealing system. Control the atmospheric side of the seal. Since the process liquids are in contact with the atmosphere, they may dry out, crystallize, or coking. It is very important to prevent interaction with the atmosphere in order not to adversely affect the sealing performance. Capture and/or prevent leaks. The sealed flushing scheme can provide a method to prevent leakage into the atmosphere. Moreover, they can also provide a backup for the main seal during installation. This will provide users with the opportunity to operate for a short period of time in the event of a seal failure, so as to shut down the equipment more systematically. Detect leaks. A sealed flushing option can be chosen, allowing for the measurement of leakage amounts and the monitoring of sealing performance.
Go to the homepage and search for sealing and flushing solutions; there are many explanations available
The specific flushing scheme depends mainly on the process medium transported by your pump
Based on the requirements of the seal itself, the properties of the medium in use, the conditions available at the site, the importance of the pump, the reliability requirements for the seal at the site, and the purchase price of the product
The specific flushing scheme depends mainly on the process medium transported by your pump