Selection of high-temperature fans
Thread Content
There is a project that involves a high-temperature exhaust fan: the pressure at the fan’s inlet is -1 KPa and the temperature is 600°C, while the required pressure at the outlet is 8 KPa. The air flow rate is 2000 Nm3/h. Is it necessary to insulate the fan itself? What are the requirements for insulation materials and thickness?
A temperature of 600 degrees can only serve as a reference for gas turbines
We can produce 200mm insulation foam, but the cost is relatively high. If you’re interested, we can discuss possible solutions. Thank you!
13772222418, same WeChat ID
At 600 degrees, it’s essential to maintain heat retention; otherwise, heat loss will be excessive, and there’s a risk of burns. It is recommended to find a professional insulation manufacturer and get a quote. Looking forward to the poster’s further sharing of additional plans.
The project is already in operation, and the wind turbine manufacturer will not allow insulation work to be carried out
Such high temperatures require insulation. The insulation requirement is that at room temperature, the temperature on the outside of the insulation should be below 50°C. Energy conservation and environmental safety requirements.
At 600 degrees, it’s unsafe without insulation