Looking for recommended manufacturers
Thread Content
We are planning to upgrade our equipment by adding a small mechanical unit (a compressor or some other type of mechanical device). The medium to be used is hydrogen sulfide with a purity of over 99% in gaseous form. The inlet pressure should be 0.5 MPA, while the outlet pressure needs to be above 18 MPA. The maximum flow rate required is 500 cubic meters per hour; the flow rate needs to be adjusted frequently, and the higher the precision, the better. Please provide some recommendations. Thank you
A reciprocating compressor should work; you can ask the manufacturer of reciprocating compressors.
Our company can manufacture such compressors. Contact Liu at 13585478769 (the same WeChat number)