Definition of pressure vessels

Thread Content

We need to design a container with a pressure of 0.75 MPa, internal dimensions of 1.8 meters * 0.8 meters * 1 meter, and a volume of 1.44 cubic meters. According to the \"Catalogue of Special Equipment\", a pressure vessel is a sealed device used to hold gases or liquids and withstand certain pressures; it is defined as a fixed or mobile vessel whose maximum working pressure is greater than or equal to 0.1 MPa (gauge pressure) for gases and liquefied gases, and whose maximum working temperature is greater than or equal to its standard boiling point, with a volume of 30 L or more and an inner diameter (for non-circular cross-sections, this refers to the largest geometric dimension of the cross-section) of 150 mm or more； Gas cylinders, liquefied gas cylinders, and cylinders for liquids with a standard boiling point of 60°C or lower, whose nominal working pressure at full charge is greater than or equal to 0.2 MPa (gauge pressure), and whose product of pressure and volume is greater than or equal to 1.0 MPa•L ； Oxygen chamber. Does my gas fall under the category of \"gases whose product of pressure and volume is greater than or equal to 1.0 MPa•L\"? Is this the latest regulation?