How to make jacketed container seals
Thread Content
For jacketed vessels, how is welding carried out at the junction of the jacket and the cylinder? How is the support jacket seal made? Cylinder DN1500, jacket DN1600, welded at the cylinder.
For jacketed vessels, how is welding carried out at the junction of the jacket and the cylinder? How do I make a jacket seal? Cylinder DN1500, jacket DN1600, welded at the cylinder.
Where are the drawings? For welding, a welding workspace is required; as long as there is space, it’s sufficient.
Inside, interlayer reinforcement bars are fixed by welding, and then a jacket is fitted and welded on.
What is the purpose of adding this rib plate between the jacket and the container: to prevent negative pressure-induced instability, as a mounting fixture, or for some other reason?
In other words, the support structure of a jacketed container is generally located on the jacket; if there are no support elements inside the jacket, then the inner cylinder must rely solely on the welds between the jacket and the cylinder for support, which does not provide sufficient strength. Therefore, support ribs need to be included inside the jacket. Some are placed at the lower head, while others are placed at the cylinder.
Increase strength to prevent instability. Generally, it is used more to prevent instability