saddle problem
Thread Content
Five pieces of equipment with an engineering diameter of 1900 are connected in series, and the total weight is very large. What kind of form does the saddle need to be designed in?
The equipment is large, but your support load is not the load of the entire equipment. You only need to choose the saddle according to the load of each support point.
Horizontal vessels with a diameter of 1900 are very common. Even if four of them are strung together, only the basic issues need to be considered. The basic issues are issues to be considered by structural professionals. The supports of the horizontal vessels can be designed according to the normal design.
Generally, the middle fixed bearing and the remaining sliding bearings
What kind of series connection is it? Overlay?
If five horizontal equipment with a diameter of 1900 are stacked together, the saddle design is very troublesome and requires overall modeling stress analysis. It’s normal if placed horizontally
What kind of series connection? Don't understand
If five pieces of equipment are overlapped, the weight of the bottom saddle will be very heavy.
The bottom saddle can bear the weight of five pieces of equipment, and the load-bearing capacity will be very large.
This is more troublesome, let’s model stress analysis.