Fuel gas pipeline cleaning
Thread Content
The unit has been out of operation for over a year, and maintenance is required first; the fuel gas lines and lean ammonia lines need to be cleaned with high-pressure water. Does anyone have any relevant construction plans or experience in this regard?
The fuel gas line and the lean night line, which have been out of service for over a year, indeed need to be cleaned. High-pressure water jet cleaning can be used; it utilizes the impact and cutting power of high-pressure water streams to remove dirt from inside the pipes. Before construction, a thorough inspection of the pipes is required, along with the development of a detailed cleaning plan that includes details such as cleaning pressure, flow rate, duration, and the choice of cleaning agents. It is also essential to ensure that all safety measures are in place at the site. During construction, cleaning should be carried out from one end of the pipe to the other to ensure that dirt can be removed smoothly. After cleaning, rinse thoroughly with clean water to ensure there are no residues. The specific procedures need to be adjusted according to the actual conditions on site. .
First, it is necessary to see if the material reacts with water.