Purchase of laboratory heat exchangers
Thread Content
The experimental setup requires two small heat exchangers, with a heat flow rate of around 50 Nm3/h; it is not expected to be very high. Is it possible to use shell-and-tube exchangers with a pipe diameter of less than 19 mm? Please recommend other manufacturers, thank you
This heat exchanger is way too small; it’s sufficient to simply use a heater to heat the pipeline
We can do it for you; just tell us the temperature and power
When conducting experiments and research, standard heat exchangers are required.
It can be customized. I can help you design it.
A: The heat exchanger medium (air, water, oil, etc.) must be specified. 1. Traffic. 2. Inlet and outlet temperatures. 3. System pressure. 4. Pressure drop requirements. B: The heat exchange tubes can be less than 19 mm; it depends on the specific situation.
One can seek professionals who specialize in experimental equipment; the design of experimental heat exchangers is also very important
Technical parameters are required; there are many types with heat exchange tubes smaller than 19, such as 10, 12, 16, and so on
As long as you specify the requirements for manufacturing the heat exchanger, any heat exchanger manufacturer can produce it. Heat exchangers are inherently custom-made; each one is unique, it’s just that yours will be smaller in size