How to drill a hole with φ1.2 at a depth of 35?
Thread Content
Solution needed: How to drill a hole with a diameter of φ1.2 at the center of a 304 stainless steel round bar with a diameter of 60 mm, requiring a depth of 35 mm? What is the appropriate machining method, and which drill bit and processing techniques should be used?
Jet head! Such a small and deep hole! ! It’s not easy!
An electric spark drilling machine can be used to drill holes with diameters ranging from ∮0.3 to ∮3.0 mm, and the maximum depth-to-diameter ratio can exceed 200:1
I would like to ask what the specific use of Kong in China is, and whether it can be made larger
A nozzle needs to be made, and the holes cannot be too large; the steam pressure is too high, so only such small holes can be used
Well, it’s indeed quite difficult. So I have no idea at all right now……
What level of precision can electric spark drilling ensure for the diameter of the hole? Can H11 be guaranteed? Thank you
You need to consult the manufacturing unit for this, as the precision depends greatly on the equipment and the operators.
It is difficult to achieve drilling of a φ1.2 hole to a depth of 35 mm in 304 stainless steel using machining techniques. Waste drill bits and materials. Optimal laser drilling process.