LPG loading crane nozzle exhaust hose
Thread Content
Near the quick connector of the liquefied propane loading arm at our company, there is a 4-inch metal hose used to drain the residual propane between the arm valve and the tank truck valve after loading is complete. This metal hose is tied to the loading arm; due to the large volume of material loaded each day, the hose bends frequently, and within a few months it suffers from fatigue damage. There isn’t really any effective way to solve this problem, yet safety regulations must still be met
Has the original poster found a good solution? We also have this problem.
It cannot be stacked; use it as a horizontal surface or shelf and then place it upright.