Thread Content
1. Fixed conveyors shall be installed on a fixed foundation in accordance with the specified installation method. Before the mobile conveyor is put into operation, its wheels should be wedged with wooden blocks or braked. To prevent movement around during operation, when multiple conveyors are in use simultaneously, there should be a one-meter clearance between the conveyors and between them and the walls. II. Before using the conveyor, it is necessary to check whether all moving parts, the belt fasteners, and the loading devices are in good condition, as well as whether the protective equipment is complete. The tension of the tape must be adjusted to an appropriate level before starting. III. The belt conveyor should be started with no load. Feeding can only be started once the operation is normal. It is prohibited to start the machine before feeding the material. IV. When several conveyors are operated in series, they should be started in sequence, starting from the discharge end. Feeding can only be started after everything is operating normally. V. When the belt deviates from its path during operation of the conveyor, it should be stopped for adjustment; forced use should be avoided to prevent wear on the edges and increased load. VI. The operating environment of the conveyor and the temperature of the material being conveyed must not exceed 50°C or be lower than -10°C. Materials containing acidic, alkaline oils and organic solvents must not be transported. VII. Pedestrians or passengers are prohibited on the conveyor belt. 8. Before parking the conveyor, feeding must be stopped first; it can only be parked after all the material on the belt has been unloaded. IX. The motor of the conveyor must be well insulated. Do not pull or drag the cables of mobile conveyors carelessly. The motor must be reliably grounded. 10. It is strictly prohibited to pull the conveyor belt by hand when it is slipping, to avoid accidents.