Thread Content
What materials are used in composite panels? Composite panels are generally classified into: metal composite panels, wood composite panels, color steel composite panels, rock wool composite panels, and so on. Introduction to the LPBH10.6 Large-Scale Plate Thickness Measuring Instrument: The LPBH10.6 large-scale plate thickness measuring instrument can determine the thickness of PVC flooring; it is capable of measuring the thickness at 6 different points on one piece of flooring at a time. Composition and structure of the LPBH10.6 large-scale sheet thickness measuring instrument system: The entire set of equipment mainly includes: contact sensors (6 pairs in total), fixed brackets, intermediate brackets, movable brackets, tempered glass sheets, linear guides, sliders, a control cabinet, an industrial computer, a display, an alarm, a printer (not shown in the diagram), etc. Technical parameters and environmental requirements for the LPBH10.6 large-sheet thickness gauge: Measurement range: 1–10 mm; Measurement accuracy: ≤±0.02 mm; Sampling interval: 1 ms; Number of measurement points: 6. Pressure of the sensor on the upper side: 210 g; Pressure of the sensor on the lower side: 150 g; Compressed air pressure: 0.25–0.5 MPa; Power supply voltage: AC 220±15% V, 50 Hz. Operating temperature: 0–45°C; Operating humidity: 90% RH (without condensation). Estimated time per sheet: <60 s; Normal service life of the sensor: >8 million cycles