How to ground a welding machine?

The grounding of a welding machine is very important as it helps ensure work safety. There are generally two ways to ground a welding machine: 1. Using a grounding wire: Connect the grounding wire to the grounding screw on the welding machine, and insert the other end into a proper grounding point, such as a grounding rod or the ground itself. 2. Use a grounding clip: Some welding machines are equipped with a grounding clip, which can be clamped to the workpiece to ensure good contact between the grounding clip and the workpiece. At the same time, it is also necessary to ensure that the workpiece itself is grounded. Please note that the grounding equipment must comply with relevant standards and regulations; the material of the grounding wires should be reliable, and a proper grounding condition must be maintained. It is recommended to read the product manual carefully before using the welding machine, and to ground it properly according to the instructions, in order to ensure safe operation. .

Why can’t the welding machine be grounded? According to the standards, it’s sufficient to ensure proper grounding of the machine itself as well as the welding electrode