On the topic of \"Compilation of Foreign Standards for Nickel-Based Corrosion-Resistant Alloys\"
Thread Content
This post was last edited by nj1952 on 2017-6-25 at 14:52. Topic: Compilation of Foreign Standards for Nickel-Based Corrosion-Resistant Alloys. Book title: Compilation of Foreign Standards for Nickel-Based Corrosion-Resistant Alloys. Authors: Steel Standards Department of the Information and Standards Research Institute under the Ministry of Metallurgical Industry, and the Third Plant of the Great Wall Steel Plant under the Ministry of Metallurgical Industry. Publisher: Science and Technology Literature Publishing House； Chongqing Branch Publication date: January 1987 Overview: This book compiles the standards for nickel-based corrosion-resistant alloys from the United States, West Germany, the United Kingdom, Japan, and France. 1. The author has attached the table of contents of Compilation of Foreign Standards for Nickel-Based Corrosion-Resistant Alloys for the benefit of all readers. 2. As this book was published a long time ago, please check its relevance: http://www.document-center.com
"Compilation of Foreign Nickel-Based Corrosion-Resistant Alloy Standards" Table of Contents (1) American Nickel-Based Corrosion-Resistant Alloy Standard ASTM B163-84 Technical Conditions for Nickel and Nickel Alloy Seamless Pipes for Condensers and Heat Exchangers ASTM B166-84 Nickel-Chromium-Iron Alloy (UN SN06600 and N06690) Technical Conditions for Round Bars, Rods and Wires ASTM B167-83 Nickel-Chromium-Iron Alloy (UN SN06600 and N06690) Seamless pipe technical conditions ASTM B168-83 Technical conditions for nickel-chromium-iron alloy (UN SN06600 and N06690) plates, sheets and strips ASTM B333-84 Technical conditions for nickel-molybdenum alloy plates, sheets and strips ASTM B335-83a Technical conditions for nickel-molybdenum alloy round rods ASTM B407-84 Technical conditions for nickel-iron-chromium alloy seamless pipes ASTM B408-82 Technical conditions for nickel-iron-chromium alloy round rods and rods ASTM B409-80 Technical conditions for nickel-iron-chromium alloy plates, sheets and strips ASTM B423-84 Technical conditions for nickel-iron-chromium-molybdenum-copper alloy (UN SN08825 and N08221) seamless pipes ASTM B424-84 Technical conditions for Ni-Fe-Cr-Mo-Cu alloy (UN SN08825 and UN SN08221) plate, sheet and strip ASTM B425-84 Technical conditions for round rods and rods of Ni-Fe-Cr-Mo-Cu alloy (UN SN08825 and UN SN08221) ASTM B434-83 a Nickel-molybdenum-chromium-iron alloy (UN SN10003) Technical conditions for plates, sheets and strips ASTM B435-84 Nickel-chromium-molybdenum-iron alloy (UN SN06002) Technical conditions for plates, sheets and strips ASTM B443-84 Nickel-chromium-molybdenum-niobium alloy (UN SN06625) Technical conditions for plates, sheets and strips ASTM B444-84 Nickel-chromium-molybdenum-niobium alloy (UN SN06625) pipe technical conditions ASTM B445-81 Nickel-chromium-iron-niobium-molybdenum-tungsten alloy (UN SN06102) seamless pipe technical conditions ASTM B446-84 Nickel-chromium-molybdenum-niobium alloy (UN SN06625) round rods and rods technical conditions ASTM B462-82 Technical conditions for pipe flanges, forged fittings, valves and components of forged or rolled chromium-nickel-iron-molybdenum-copper-niobium stabilized alloy (UN SN08020) for high temperature corrosion resistance ASTM B463-84 UN SN08020, UN SN08026 and UN SN08024 alloy plate, sheet and strip SN08020, UN SN08026 and UN SN08024 alloy welded pipes (PIPE) technical conditions ASTM B468-84 UN SN08020, UN SN08026 and UN SN08024 alloy welded pipes (TUBES) technical conditions ASTM B471-85 Chromium-nickel-iron-molybdenum-copper-niobium stabilized alloy (UN SN08020) Technical conditions for round spring wire ASTM B472-85 Technical conditions for chromium-nickel-iron-molybdenum-copper-niobium stabilized alloy for reforging (UN SN08020) technical conditions for billets and rods ASTM B473-82 Technical conditions for chromium-nickel-iron-molybdenum-copper-niobium stabilized alloy (UN SN08020) rods and wires ASTM B474-82 Technical conditions for welding chromium-nickel-iron-molybdenum-copper-columbium stabilized alloy (UN SN08020) pipe (PIPE) ASTM B475-85 Technical conditions for chromium-nickel-iron-molybdenum-copper-niobium alloy (UN SN08020) circular braiding wire ASTM B509-77 (Reconfirmed in 1983) Supplementary requirements and technical conditions for nickel alloy plates for the nuclear industry ASTM B510-77 (Reconfirmed in 1983) Supplementary requirements and technical conditions for nickel alloy round rods and rods for the nuclear industry ASTM B511-81 Technical conditions for nickel-iron-chromium-silicon alloy rods and profiles ASTM B512-81 Nickel-chromium-silicon alloy (UN SN08330) technical conditions for billets and rods ASTM B513-79 Supplementary requirements for nickel alloy seamless pipes for nuclear energy SN06600) Welded pipe (TUBE) technical conditions ASTM B518-81 Nickel-chromium-iron-niobium-molybdenum-tungsten alloy (UN SN06102) technical conditions for round bars and rods ASTM B519-81 Nickel-chromium-iron-niobium-molybdenum-tungsten alloy (UN SN06102) technical conditions for medium-thick plates, sheets and strips ASTM B535-82 Technical conditions for nickel-iron-chromium-silicon alloy (UN SN08330) seamless and welded pipes (PIPE) ASTM B536-83 Technical conditions for nickel-iron-chromium-silicon alloy (UN SN08330 and N08332) plate, sheet and strip ASTM B546-83 Ni-Fe-Cr-Si alloy (UN SN08330) Electrofusion welded pipe (PIPE) technical conditions ASTM B564-82 Technical conditions for nickel alloy forgings ASTM B572-83a Technical conditions for nickel-chromium-molybdenum-iron alloy (UN SN06002) round rods ASTM B573-83a Technical conditions for nickel-molybdenum-chromium-iron alloy (UN SN10003) round rods ASTM B574-84 Technical conditions for low carbon nickel-molybdenum-chromium alloy round rods ASTM B575-86 Technical conditions for low carbon nickel-molybdenum-chromium alloy plates, sheets and strips ASTM B581-81 Technical conditions for nickel-chromium-iron-molybdenum-copper alloy round rods ASTM B582-84 Technical conditions for nickel-chromium-iron-molybdenum-copper alloy plates, sheets and strips ASTM B599-80 Technical conditions for plate, sheet and strip of nickel-iron-chromium-molybdenum-niobium stabilized alloy (UN SN08700) ASTM B621-83a Technical conditions for round rods of nickel-iron-chromium-molybdenum alloy (UN SN08320) ASTM B625-83 Ni-Fe-Cr-Mo-Cu low carbon alloy (UN SN08904 and UN SN08925) Technical conditions for medium and thick plates, sheets and strips ASTM B626-84 Technical conditions for nickel alloy welded pipes (TUBE) ASTM B649-83 Ni-Fe-Cr-Mo-Cu low carbon alloy (UN SN08904 and N08925) Technical conditions for rods and wires ASTM B668-84 UN SN08028 Technical conditions for seamless pipes (TUBE) ASTM B672-80 Nickel-Iron-Chromium-Molybdenum-Niobium Stabilized Alloy (UN SN08700) Technical Conditions for Rods and Wire ASTM B673-83 UN SN08904 and UN SN08925 Welded Pipe (PIPE) Technical Conditions ASTM B674-83 UN SN08904 and UN SN08925 Welded Pipe (TUBE) Technical Conditions ASTM B675-80 UN SN08366 welded pipe (PIPE) technical conditions ASTM B676-80 UN SN08366 welded pipe (TUBE) technical conditions ASTM B677-84 UN SN08904 and UN SN08925 seamless pipe technical conditions
The last edit to this post was made by nj1952 on 2017-6-25 at 14:59. (2) German Federal Republic standards for nickel-based corrosion-resistant alloys: DIN 17741 covers the chemical composition of low-alloy, malleable nickel alloys; DIN 17742 covers those with chromium; DIN 17743 covers those with copper; DIN 17744 covers those with molybdenum and chromium; DIN 17745 covers malleable alloys composed of nickel and iron. DIN 17750 specifies the properties of strips and plates made from nickel and malleable nickel alloys; DIN 17751 covers the properties of tubes made from these materials; DIN 17752 deals with the properties of rods made from them; DIN 17753 addresses the properties of wires made from nickel and malleable nickel alloys; DIN 17754 relates to die-forged and free-forged products made from these alloys. DIN 59740 specifies the dimensions and allowable tolerances for hot-rolled plates and strips of nickel and malleable nickel alloys; DIN 59741 covers the dimensions and allowable tolerances for hot-rolled strips; DIN 59742 specifies the dimensions and allowable tolerances for hot-rolled discs and rings; DIN 59745 covers the dimensions and allowable tolerances for cold-rolled plates and strips; DIN 59746 specifies the dimensions and allowable tolerances for cold-rolled strips and bars of malleable nickel and its alloys; DIN 59755 deals with the dimensions and allowable tolerances for cold-worked tubes of these materials; DIN 59760 specifies the dimensions and allowable tolerances for hot-rolled round rods of nickel and malleable nickel alloys; DIN 59761 covers the dimensions and allowable tolerances for hot-rolled square rods; DIN 59762 addresses the dimensions and allowable tolerances for hot-rolled hexagonal rods; DIN 59763 specifies the dimensions, allowable tolerances, and static values for hot-rolled rectangular rods; DIN 59765 covers the dimensions and allowable tolerances for drawn round rods of nickel and malleable nickel alloys; DIN 59766 deals with the dimensions and allowable tolerances for drawn square rods; DIN 59767 specifies the dimensions and allowable tolerances for drawn hexagonal rods; DIN 59768 covers the dimensions, allowable tolerances, and static values for drawn rectangular rods with sharp edges. DIN 59780 specifies the dimensions and allowable tolerances for hot-rolled round wires of nickel and malleable nickel alloys; DIN 59781 covers the dimensions and allowable tolerances for drawn round wires; DIN 59782 deals with the dimensions and allowable tolerances for drawn square wires; DIN 59783 specifies the dimensions and allowable tolerances for drawn hexagonal wires. (3) British standards for nickel-based corrosion-resistant alloys: BS 2901: Part 5:1970 covers electrodes and wires for gas shielded arc welding; British Technical Specifications, Part 5: Nickel and Nickel Alloys. BS 3071:1986 deals with cast nickel-copper alloys; British Technical Specifications. BS 3072:1983 covers thin and medium-thickness sheets of nickel and nickel alloys; British Technical Specifications. BS 3073:1977 specifies standards for strips of nickel and nickel alloys. AMD 4201 – Amendment No. 2 to BS 3073:1977 (issued and effective March 31, 1983). BS 3074:1983 covers standards for seamless tubes of nickel and nickel alloys; AMD 4491 – Amendment No. 1 to BS 3074:1983 (issued and effective April 30, 1984). BS 3075:1976 specifies standards for wires of nickel and nickel alloys; AMD 4112 – Amendment No. 1 to BS 3075:1976 (issued and effective November 30, 1982). BS 3076:1976 covers standards for rods of nickel and nickel alloys; AMD 4111 – Amendment No. 2 to BS 3076:1976 (issued and effective February 28, 1983). (4) Japanese standards for nickel-based corrosion-resistant alloys: JIS G 4901-1981 covers corrosion-resistant and heat-resistant alloy rods; JIS G 4902-1984 covers corrosion-resistant and heat-resistant alloy sheets; JIS G 4903-1981 deals with seamless nickel-chromium-iron alloy tubes for use in pipelines; JIS G 4904-1981 covers seamless nickel-chromium-iron alloy tubes for use in heat exchangers. (5) French standards for nickel-based corrosion-resistant alloys: NF A 54-401, June 1973, covers nickel and nickel alloys, as well as nickel-molybdenum alloys and nickel-molybdenum-chromium alloys