Metal paint is used for anti-corrosion on the inner walls of diol storage tanks, which can extend the service life of the coating and reduce investment costs
Thread Content
Polymer metal paint serves as an alternative to metal thermal spraying (aluminum) for corrosion protection on the inner walls of diol storage tanks, extending the service life of the coating and reducing investment costs. We know that the inner walls of diol tanks are generally equipped with an anti-corrosion coating in the form of thermal sprayed aluminum; not only does this coating usually start to fail after about 5 years, but it also results in high investment costs. Using metal paint eliminates the need for sandblasting and requires minimal surface treatment; construction can proceed once the St1 grade is achieved. By adopting this method, not only can the service life of the coating reach over 10 years, but construction costs can also be reduced by more than 60%. For details, please refer to the construction drawings for the 4,000 cubic meter diol storage tank:
Using polymer metal paint for corrosion protection on the inner walls of diol storage tanks can replace traditional thermal metal spraying; this method not only extends the service life of the coating to over 10 years but also reduces construction costs by more than 60%. Furthermore, when using metal paint, a St1 level of surface treatment is sufficient for application, eliminating the need for sandblasting and thus helping to reduce investment costs. .