A newcomer is asking about the operation of CAESAR II
Thread Content
A newcomer is asking for some guidance on how to use CAESAR II. Since I’m just starting to learn it, I’m not very good at using it, and I encountered some problems during the trial period; I would appreciate some advice. During the calculation process, a warning kept appearing saying “Warning: No available materials in the material database,” but I had already selected the materials. The material data was downloaded from a expert on the forum; I’m not sure where the mistake lies. The “20” here probably refers to 20# steel. I hope some experts can give me some advice
You entered the diameter yourself, right? You need to use a standard value such as inches so that there’s a corresponding material database; you can change the diameter later. That’s how I understand it
My diameter is in mm; so it’s a DN65 pipe, and 76 mm should be correct, right?
20 steel is a domestic grade, while C2 with its built-in material database corresponds to an American standard grade. So the grade corresponding to 20 steel needs to be converted to the American standard