Thread Content
When using the HaoChen CAD drawing software to create drawings, after entering drawing commands in the command line and proceeding with the drawing tasks, it is found that selecting multiple objects sequentially does not work. How should this issue be handled? Next, I’ll share with you solutions to the problem of being unable to select multiple objects sequentially in the HaoChen CAD drawing tutorial for beginners! Solutions for invalid operations when drawing in CAD: Multiple objects can be selected sequentially; multiple objects cannot be selected sequentially. To resolve this issue, follow these steps: 1. Enter the shortcut command OP (OPTIONS) in the command line of the HaoChen CAD software, then press the [Enter] key to bring up the [Options] dialog box ； 2. Switch to the [Selection Set] tab in the [Options] dialog box that appears ； 3. On the [Selection Set] tab, locate and uncheck the [Add to Selection Set with Shift Key (F)] checkbox in the [Selection Set Mode] dropdown menu, as shown in the figure below. 4. Finally, click the [OK] button. At this point, it is possible to select multiple objects sequentially. The above are the solutions to the problem of multiple objects not being selected successfully when using certain shortcut keys or executing CAD drawing commands in this introductory tutorial on CAD drawing. If friends encounter this situation in their future drawing work, they can try to solve it using the tutorial above! I hope this can help those who are just starting to learn the *Haocen CAD drawing software~