What should I do if the graphics from a CAD drawing are not displayed in their entirety after being copied and pasted into Word?

Thread Content

When using the HaoChen CAD drawing software to create drawings, it is sometimes necessary to present them in Word format. But what should be done if, after copying the graphics from the CAD drawing into Word and printing it out, the drawing does not appear in its entirety? Let me give you a detailed introduction below! Steps to resolve the issue of incomplete display of graphics from CAD drawings when copied and pasted into Word: 1. First, open HaoChen CAD, then enter “OP” in the command line and press Enter to open the “Options” dialog box. As shown in the figure below: 2. Then switch it to the “Display” tab. 3. Click the “Color” button to open the “Window Graphic Color” dialog box. 4. In the “Color” dropdown menu, change the color to “White”. 5. Click the “Apply and Close” button. 6. Click “OK” to save and exit. 7. Copy the graphics from the CAD drawing to the clipboard. 8. Finally, copy the graphic from the clipboard into the Word document, and that’s it. As shown in the figure below: The above are the solutions to the issue of incomplete display when copying and pasting graphics from CAD drawings into a Word document using the Haochen CAD drawing software and then printing it out. If you encounter such problems in future drawing tasks, you can refer to the above tutorials to solve them!