Newcomer asking for help, refrigerant circulation, some modules have zero input logistics.
Thread Content
This post was last edited by Wang Yi on 2023-3-25 10:59. It is the first time for a newbie to post. Please correct me if there are any irregularities.
Hello, there may be the following reasons for the zero input flow in the refrigerant cycle.: 1. Air leakage or refrigerant leakage in the circulation system causes the condenser and evaporator to fail to operate normally, resulting in zero input flow. 2. The sensor used is faulty or damaged, causing the value of the input logistics to be misread as zero. 3. Program errors or failures in the control system cause abnormal output signals, which in turn causes the equipment to operate abnormally. It is recommended that you first check whether there is air leakage or refrigerant leakage in the refrigerant circulation system, and check whether the sensors and control systems are working properly. If the above methods cannot solve the problem, it is recommended that you ask professional technicians to check and troubleshoot. .
Mine is an aspen simulation, so there should be no problems with air leakage or sensor failure:o