High reward!~ I would like to ask how to draw pipe racks using this 3D software, and how to modify the material templates
Thread Content
This software has been in use for many years, and it has never been possible to draw pipe racks directly on 3D diagrams. I tried it today and it was possible to draw them, but there is no data available for material accounting; I’m not sure why. Could it be that there’s an issue with the way of drawing them? Are there any relevant video explanations? Another thing is the template for generating materials; it’s not the desired template. If changes are needed, how should one proceed?
Regarding how to draw pipe racks, the following steps can be followed: 1. First, select “Graphic Modeling” or “Modular Modeling” in the software, and then choose the “Pipes” or “Pipeline” tool； 2. On the drawing interface, select “Draw 2D Sketch” or “Draw 3D Solid” to start drawing the pipeline’s outline ； 3. After completing the drawing, select parameters such as the material, diameter, and length of the pipe in the Property Editor ； 4. Finally, save the drawing results and add them to the material library for future use. To modify a material template, you can follow these steps: 1. Go to the “Material Library” interface of the software and select the material template that needs to be modified ； 2. Click the “Edit” button to enter the template editing interface ； 3. In the template editing interface, various parameters of the material can be modified, such as density, elastic modulus, coefficient of thermal expansion, etc ； 4. After making the changes, save and exit the template editing interface to apply the modifications. If you are not familiar with the above operations, you can refer to the software’s official tutorials or online video guides to help you better master its usage skills. .
This post was last edited by wsybda on 2023-6-13 17:06. It seems that your first point does not cover anything related to pipe racks? Secondly, how do I modify the material template in EXCEL format? ?
If you’re interested, you can take a look at my article; it can help you ask our boss, as he knows about it.
How much does a set of your software cost?
This post was last edited by “Twenty Years as a Slave” on March 8, 2024, at 09:19. Well, it’s quite pricey; the lifetime cost is over 100,000 yuan, while the rental fee is only in the tens of thousands of yuan. We provide free training, and there are dedicated technicians who handle the configuration of materials and isometric drawings. During my last visit to Xi’an for follow-up discussions, several companies had issues related to pipe racks; we held a separate technical meeting to explain everything about pipe racks.
This post was last edited by Weinu Ershinian on 2024-3-8 at 09:23. Recording: Wang Zhongwei. Scheduled meeting date: 2024-03-04 at 15:54:58. Recording file: https://meeting.tencent.com/v2/cloud-record/share?id=d02de6f2-9abc-46c3-b1a4-5d68ea2441b5. Access password: L9Wd. Previously, there was a discussion regarding pipe supports
If you’re interested, you can send some information for introduction: a15701691730