chemCAD simulation
Thread Content
It’s my first time using chemCAD; I click on Run but it doesn’t execute. I’d like to ask the experienced experts: is it a problem with the software installation or with the settings? Thank you so much! 03/02/24 11:29:29 Started input data check. 03/02/24 11:29:29 Data check completed. Number of errors = 0, Number of warnings = 0. That’s all; the feed flash evaporation can be calculated, but no results are available for the discharge. Using the previous example, changing the feed conditions yields no change!
It could be a software setting issue, or there might be an error in the simulation process settings. Check whether the flowchart correctly connects the components and devices, and verify that the material and thermodynamic model settings are accurate. If the problem persists, try reinstalling the software or contact technical support. .
Verify the program startup and operation conditions, checking them one by one.
It’s probably a software licensing issue; try another one.