Error in Aspen Plus design specification summary
Thread Content
An error is reported in the Aspen Plus design specifications: a certain component has not been specified as belonging to a particular stream; it’s not clear whether it should be included in that stream or at the flash outlet
Check and ensure that the component has been correctly specified in the stream; if not, it needs to be added to the relevant streams. At the same time, check whether the settings at the flash outlet are correct to ensure that the components can flow properly during the simulation. If the problem persists, it may be necessary to check whether there are any other incorrect settings in the entire simulation process. .
You’re welcome. If you have any other questions, feel free to ask. Wish you success using Aspen Plus. .