Reinforcement ring installation
Thread Content
The axial projection dimension of the distance between the outer edge of the reinforcement ring and the outer diameter of the head should be greater than or equal to 0.1D. Which distance does this dimension refer to exactly?
This dimension refers to the axial projection distance between the outer edge of the reinforcement ring and the outer diameter of the head, and it must be greater than or equal to 0.1D. Here, D refers to the outer diameter of the head. For example, if the outer diameter of the head is 100 mm, the axial projection distance between the outer edge of the reinforcement ring and the outer diameter of the head should be no less than 10 mm. .