EPC general contracting for the torch unit of the industrial demonstration project for Shaanxi Shenhui Polyolefin Elastomer (POR), and tendering for the RTO exhaust gas incineration unit

Thread Content

Recently, a tender announcement was released for the EPC general contracting of the torch unit and the RTO dryer for burning exhaust gases in the industrial demonstration project for polyolefin elastomers (POR) carried out by Shaanxi Shanmei Xiechuangda New Materials Co., Ltd.: Details of the tender for the torch unit; The period during which the tender documents can be obtained is from 15:00 on March 13, 2026, to 18:00 on March 19, 2026； Bid deadline: 9:00 am on April 10, 2026. Scope of the tender: This tendering project is divided into 1 bid package; it involves the EPC contract (excluding civil works) for the torch unit of the polyolefin elastomer (POR) industrial demonstration project. The scope of this project includes: the entire closed above-ground flare system, from the point where the flare gas enters the flare system boundary up to the point where the gas is released after combustion. This includes, but is not limited to: flare gas burners, flare stacks, liquid separation tanks, water seal tanks, condensate pumps, wastewater tanks, wastewater pumps, steam systems, instrument air systems, nitrogen systems, heat tracing systems, water supply and drainage systems, electrical systems, instrument control systems, GDS systems, facility lighting, anti-corrosion and insulation measures, as well as the design, supply, installation, and commissioning of related facilities within 1 meter of the boundaries of the facility, including pipelines and ductwork that are directly connected to upstream facilities. For the specific scope of supply, parameters, and technical requirements, please refer to Chapter 5 of the tender documents, as well as other attachments such as the Employer’s Requirements and Technical Specifications. Qualification requirements: (1) Design qualification: One must possess a Class A or higher qualification for environmental engineering design (air pollution control projects), issued by the relevant administrative authorities, or a Class A or higher qualification in the chemical, petrochemical, and pharmaceutical industry (chemical engineering) field. In the case of a consortium bid, the design firm must meet the requirements. (2) Construction qualifications: The contractor must hold a general contracting qualification for petrochemical engineering of level 2 or above, issued by the relevant administrative authority, and its Safety Production License must be valid. In the case of a consortium bid, the construction contractor must meet the requirements. Performance requirements: (1) When the bidder submits a bid as an individual entity, it must provide evidence of at least one set of EPC project delivery experience for 【ground-mounted enclosed flares】 from recent years (from January 1, 2020, to the bid submission deadline) ； (2) When the bidder submits a bid as a consortium, the consortium leader and its members shall, in accordance with the consortium agreement, provide at least one record each of design, supply, and installation experience for ground-based closed-flame torch systems from the recent years (from January 1, 2020, to the bid deadline) (experience from the same project or different projects is acceptable; one valid record must include experience in all three aspects: design, supply, and installation). Bidding details for RTO dry exhaust gas incinerator system; Time to obtain the bidding documents: from 15:00 on March 13, 2026, to 18:00 on March 19, 2026 ； Bid deadline: 9:00 am on April 10, 2026. Scope of the tender: This tendering project is divided into 1 bid package; it involves the EPC contract (excluding civil works) for the torch unit of the polyolefin elastomer (POR) industrial demonstration project. The scope of this project includes: the entire closed above-ground flare system, from the point where the flare gas enters the flare system boundary up to the point where the gas is released after combustion. This includes, but is not limited to: flare gas burners, flare stacks, liquid separation tanks, water seal tanks, condensate pumps, wastewater tanks, wastewater pumps, steam systems, instrument air systems, nitrogen systems, heat tracing systems, water supply and drainage systems, electrical systems, instrument control systems, GDS systems, facility lighting, anti-corrosion and insulation measures, as well as the design, supply, installation, and commissioning of related facilities within 1 meter of the boundaries of the facility, including pipelines and ductwork that are directly connected to upstream facilities. For the specific scope of supply, parameters, and technical requirements, please refer to Chapter 5 of the tender documents, as well as other attachments such as the Employer’s Requirements and Technical Specifications. Qualification requirements: (1) Design qualification: One must possess a Class A or higher qualification for environmental engineering design (air pollution control projects), issued by the relevant administrative authorities, or a Class A or higher qualification in the chemical, petrochemical, and pharmaceutical industry (chemical engineering) field. In the case of a consortium bid, the design firm must meet the requirements. (2) Construction qualifications: The contractor must hold a general contracting qualification for petrochemical engineering of level 2 or above, issued by the relevant administrative authority, and its Safety Production License must be valid. In the case of a consortium bid, the construction contractor must meet the requirements. Performance requirements: (1) When the bidder submits a bid as an individual entity, it must provide evidence of at least one EPC project completion for an RTO incinerator installation in recent years (from January 1, 2019, to the bid submission deadline). (2) When the bidder is a consortium, the consortium leader and its members shall, in accordance with the consortium agreement, provide at least one record of design and supply work for RTO incinerator systems from the recent years (from January 1, 2019, to the bid deadline), as well as at least one record of installation work for RTO incinerator systems or mechanical and electrical equipment for other coal chemical or petrochemical projects (records from the same project or different projects are both acceptable; each valid record must cover all three aspects: design, supply, and installation). Project Overview
Project Name: Industrial Demonstration Project for Polyolefin Elastomers (POR)
Project Owner: Shaanxi Shanmei Xiechuangda New Materials Co., Ltd.
Project Nature: Expansion project
Investment: Total investment of 1,319.62 million yuan ； Project location: Weibei Coal Chemical Industrial Park, Pucheng County, Weinan City, Shaanxi Province. Construction content: It involves the construction of an industrial demonstration facility for polyolefin elastomers (POR) as well as the necessary auxiliary facilities. The annual operating time is assumed to be 8,000 hours, with an operating flexibility range of 50% to 110%. The main construction contents include the overall layout of the plant area, process units such as raw material unloading and intermediate tanks, raw material purification, catalyst and chemical preparation, polymerization degassing, stripping, solvent recovery and purification, post-treatment and drying/packaging, as well as supporting auxiliary facilities and utility systems. The utility service facilities include production offices, warehouses, a general maintenance workshop, a circulating water station, sewage treatment systems, plant-wide water supply and drainage systems, desalinated water systems, flares and incineration facilities, and external pipelines.