I’ll teach you a trick to easily install bearing washers

Thread Content

As we all know, the quality of bearing installation has a direct impact on its operation. If it is not installed correctly or using the proper method, not only will the expected performance of the bearing not be achieved, but its service life will also be affected. Jingbo Cloud Commerce would like to share with you the correct installation positions of the different rings in bearings. ①A shaft ring, which is a bearing washer that should be installed on the shaft. ②A seat ring, which is a bearing washer that should be installed inside the seat. ③The intermediate ring, which features bearing washers with raceways on both sides, is used between the two rows of rolling elements in double-row, bidirectional thrust rolling bearings. ④Self-aligning ring, as it features a ring with a spherical back surface, enabling it to accommodate permanent angular displacement between the axis of the bearing and the axis of the housing. ⑤An aligning washer is used as a washer between the aligning washer and the thrust-bearing surface of the housing; its surface is concave spherical in shape, matching the spherical back surface of the aligning washer. Bearing sealing mainly refers to the installation of sealing devices on the two end faces of rolling bearings. Bearing seals have gradually come to the attention of people as industry has developed; it is a technology that has only gained prominence in recent years. Before the development of bearing seals, all bearings were open-type bearings.