Draw a flowchart
Thread Content
How to draw a flowchart on two A3 sheets and what is the layout?
The flowchart should be drawn in an attractive and orderly manner, with the devices arranged neatly. Generally, unit operations should be grouped together as much as possible. It has to do with aesthetics and attention to detail. You can first draw the shapes of all the devices, and then gradually adjust their relative positions on the diagram. Computer drawing is still very convenient these days. When drawing pipelines and pipe fittings, further adjustments may be required. Until a nice flowchart is drawn.
It is recommended to use diagramming software to create flowcharts: first, it facilitates making changes; second, it ensures standardization; third, it aids in sharing
If one A3 sheet is not enough, two A3 sheets can be used; the key is that the drawing must be clear. If the length is insufficient, the drawing can be extended according to the standards, or it can be divided into upper and lower sections within a single sheet – in short, as long as it looks cohesive.
Normally, one starts by drawing the equipment to get a general idea of its layout. Generally, the equipment is placed in the upper 2/3 of the area, while moving equipment is located in the lower 1/3; it’s also useful to take a look at how similar process diagrams are laid out