The thermometer needs to be inserted from the top of the pool, but the pool is 6 meters deep, so it has to be inserted quite deep, which causes it to shake. How do you handle that?
Thread Content
pH meters and thermometers need to be inserted from the top of the tank, but since the tank is 6 meters deep, this requires inserting them quite far down (although in practice they are only inserted up to 3 meters deep; this makes it impossible to take readings when the liquid level is low, and it also increases the risk of damaging the probes due to movement). What do you do in such situations?
Do we have to set the test points from the top of the pool? What’s this? There are no circulation pipes?
A sleeve can be made to extend straight to the bottom of the pool.
Can such a deep casing be made? Won’t it shake?
This post was last edited by dengzhijun on 2019-6-4 at 17:09. As shown in the image, the green parts represent the sleeve supports, which are embedded in the wall of the pool.
Either reinforce with a sleeve, or insert it from the bottom up!
Ultrasonic level gauges can be used for level measurement, and sleeves can be used for pH measurement
Ultrasonic level gauges can be used for level measurement, and sleeves can be used for pH measurement
6 meters isn’t very deep; conduits can be added, openings can be made, and it can be secured at the bottom or on the sides.