Can an explosion vent be installed on the storage tank? What is the detonation pressure of the blast relief disc?
Thread Content
Can an explosion vent be installed on the storage tank? What is the detonation pressure of the blast relief disc?
The burst disc is determined based on the design pressure of the storage tank, while the size of the explosion protection device depends on its volume
Blow-off valves can certainly be installed on storage tanks, and the burst pressure should be determined based on the design pressure of the tank! Atmospheric pressure storage tanks, low-pressure storage tanks, and pressure storage tanks – they are definitely all different!
Blowout valves can be installed on storage tanks; the specific material and size depend on the tank’s capacity. Dielectric properties determined. The burst disc pressure is determined based on the operating pressure of the tank; it is generally 1.3 to 1.5 times the operating pressure, but it must not exceed the tank’s design pressure.
All rupture disks are equipped with a rupture disk holding device, which fixes the rupture disk in place and installs it at the flange interface of the storage tank; the specific type of flange must be determined based on the design of the tank’s flange. You can contact the manufacturer for custom design.
A safety valve is generally sufficient, but for materials that cannot be released into the atmosphere, a rupture disc is used; the installation method is as described above.