Desulfurization synergist
Thread Content
I recently went to a power plant to test the desulfurization synergist. I am currently facing some issues that I don’t understand and I would like your help. 1. What are the ingredients of the desulfurization synergist and what are its general physical properties? 2/ How do you understand the synergist’s effect on the system and the mechanism of sulfide absorption by limestone? 3. What factors in the general absorption tower will have a negative effect on the synergist? For example, will the chloride ions in the tower reduce the efficiency of the synergist? Or what is the ideal ph to use? What is the normal pH in the tower here? Is it 5~6? 4. What is the significance of how the absorption tower equipment and defogging are done? Is it to rinse part of the calcium sulfite to prevent scaling? What is the arrangement in the tower from the air inlet, tower top mist removal, and what kind of trays are used for slurry spraying? Is there any filler? Can removing gypsum and adding slurry only require material conservation? 5. How is out-of-stock done? Is SCR mainstream? Is there any specific craftsmanship for this piece? Wo * ang xuexue Thank you (I can’t write too many words)
This is not the first time you have posted this, but no one has responded. There is something wrong with posting like this. Who knows what the hell "desulfurization synergist" is. For example, if a screw is loose and the master tightens it with a screw tightening tool, and you ask what the screw tightening tool is, who knows whether it is an adjustable wrench, a socket wrench, an impact wrench, a pneumatic wrench, or a screwdriver. Only you can figure out what it is before asking questions.
This is not the first time you have posted this type of post, and no one has responded. There is something wrong with posting like this. Who knows what the hell "desulfurization synergist" is. For example, if a screw is loose and the master tightens it with a screw tightening tool, and you ask what the screw tightening tool is, who knows what it is, whether it is an adjustable wrench, a socket wrench, a percussion wrench, an air wrench, or a screwdriver. Only the person involved will know. Only you can figure out what it is before asking questions.
The first one is that the formula of this stuff is generally not published. It is an acidic substance.； Second, this thing mainly increases the dissolution of calcium carbonate, increases the calcium ions in the slurry, and promotes the absorption of sulfur dioxide. ； Third, the general chloride ion concentration will affect the dissolution of calcium carbonate and reduce the efficiency. Adding synergists (usually organic acids) will promote the dissolution of calcium carbonate. The pH value is generally around 5.5. ； The fourth and fifth questions will not be repeated one by one. If you want to know more, you can add VX, and the number is the account name.
The first one is that the formula of this stuff is generally not published. It is an acidic substance.； Second, this thing mainly increases the dissolution of calcium carbonate, increases the calcium ions in the slurry, and promotes the absorption of sulfur dioxide. ； Third, the general chloride ion concentration will affect the dissolution of calcium carbonate and reduce the efficiency. Adding synergists (usually organic acids) will promote the dissolution of calcium carbonate. The pH value is generally around 5.5. ； The fourth and fifth questions will not be repeated one by one. If you want to know more, you can add VX, and the number is the account name.