MVR commissioning
Thread Content
What is the startup time of the MVR? How to calculate the starting steam volume!
It should be determined based on the compressor’s parameters, I guess
Is there a debugging manual? The MVR is operating normally; what should be the steam consumption level?
The amount of steam required for startup is the quantity of steam needed to preheat the temperature of the material in the system to the startup temperature required by the compressor; the time taken depends on the supply volume of fresh steam and the amount of material stored in the system.
Does the evaporation energy come from subsequent replenishment?
The MVR startup time is at least 2-3 hours, with the steam supply adjusted as needed
There are many influencing factors; generally, they are measured during actual operation and debugging, and the data obtained is saved as empirical data. The specific situation also depends on your driving plan.
This is related to the design and driving procedures, as well as the evaporator liquid level, initial concentration, and concentration after equilibrium. It may be 2 hours faster or 4 hours slower; the speed difference isn’t important