Problems with tank fixation after nitrogen sealing
Thread Content
The old storage tank originally did not have foot bolts; after installing a nitrogen seal, bolts were needed, but since welding was not allowed, how could anchoring be achieved? Please ask an expert for help
Drill holes on top of the existing structure. Then, strictly control the roughness of the inner wall, embed the bolts in advance, position the equipment, carry out the first grouting, and then the second grouting. For reference.
Add a collar to the outer wall of the storage tank; the collars should be placed at 90-degree intervals, with four in total, and they are connected together using bolts. The foundation bolts are then attached to these collars