Can a vertical graphite condenser be used to condense gases? How are the gas inlets and outlets connected? How does the condensate water come in and go out?
Thread Content
Can a vertical graphite condenser be used to condense gases? How are the gas inlets and outlets connected? How does the condensate water come in and go out? Is there a table of the pipe connections for vertical graphite condensers?
Sure, it’s usually done with a two-pass system: material enters and exits from the upper part where the gas phase is present, while the condensed liquid comes out from the lower part. To carry out the design, one just needs to find a manufacturer.
It can be used just like carbon steel, but pay attention to pressure and temperature; temperature is the key factor – graphite gets damaged when the temperature exceeds a certain level
Could condensate formed in the upper inlet and outlet gas phases flow downward, thereby affecting the upward movement of the gas phase?
Graphite condensers come in single-shell, single-pass designs, with gas entering from the top and exiting from the bottom, or vice versa; they are similar to falling film absorbers and require a gas-liquid separator； Single-shell two-way design; it has three ports for the material – gas enters and exits from the top, while liquid exits from the bottom; it also has a built-in gas-liquid separation function ； There are also single-cylinder four-stroke and multi-stroke types, mainly differing in their internal structure. The cooling water pipe connections can be designed according to one’s needs: smaller units have one inlet and one outlet, while larger units have multiple inlets and outlets.