Bentley 3500 Configuration Instructions
Thread Content
A brief explanation of the Bentley 3500
There’s a lot of information about the Bentley 3500 on the forums; you can search for it yourself.
The general process is as follows: 1. Communication is carried out via an RS232 port, and a connection needs to be established (using the 3500 configuration software). 2. The card has a switch for switching between configuration and operation modes, and a key is required for this. 3. The configuration software must be installed on a computer; after establishing the connection, it’s advisable to first download the configuration settings and save them to check whether the configuration has already been done, as well as to learn about the various software modules. 4. Usually, there is a configuration manual available, and configuration is necessary during installation. 5. After completing the configuration, it needs to be downloaded, and the switch should be set to the operation mode
Here’s one; I hope it can help you:lol