Talk about various probes for protecting motor equipment
Thread Content
To protect large motors, temperature and vibration sensors are often installed to monitor their operation status in real time; as a result, these sensors are coming into the focus of instrument technicians more and more. Let’s discuss this topic together
At this temperature, the vibration is mostly handled by the equipment itself; instrumentation specialists are not involved in the selection process. This approach is adopted to ensure better compatibility with embedded installation. For temperature, Pt100 is generally used, or an integrated sensor that can measure both temperature and vibration is recommended; using separate sensors is too cumbersome. The protection ratings of secondary meters are generally not suitable for on-site installation.
We once used imported integrated probes; it is estimated that they broke down due to high temperatures, so we later switched to separate ones.
For considerations such as probe installation, the original model is more convenient and suitable