The 9001 belt scale experiences large fluctuations
Thread Content
The boiler coal feeding belt is operating smoothly, with a constant frequency and a steady coal feeding rate; there is however a fluctuation of around 0.5 t/h. How should this be addressed?
Check to see if it has come into contact with any external objects
First, stop and run it at idle speed to see if there are still any fluctuations If so, check whether the belt is drifting or not, and whether the idlers are running smoothly If idling is normal, check whether the incoming material is stable
First, stop and run it at idle speed to see if there are still any fluctuations If so, check whether the belt is drifting or not, and whether the idlers are running smoothly If idling is normal, check whether the incoming material is stable
First, stop and run it at idle speed to see if there are still any fluctuations If so, check whether the belt is drifting or not, and whether the idlers are running smoothly If idling is normal, check whether the incoming material is stable
Switch the boiler feeder, check whether the belt is drifting, and whether the volume of the reverse airflow is too high; finally, verify the belt scale in accordance with the procedures.